Features

lSingle-Port MIPI® DSI Receiver

• Compliant with D-PHY1.1 and DSI1.02
• 1 Clock Lane and 1~4 Configurable Data Lanes
• 80Mb/s~1.5Gb/s per Data Lane
• Data Lane and Polarity Swapping
• Internal Rterm Calibration with Less than 5% Error
• Programmable Equalization
• Only Non-Burst Mode Supported
• Support up to 24-bit RGB/YUV Data Format
• Support YUV4:2:0 Video Format

lHDMI1.4 Receiver

• Compliant to HDMI1.4 Standard
• Support 3D Video Data Stream
• Support HDCP1.4 and DDC Slave for EDID
• Support HDMI2.0 YUV4:2:0 Video Format
• Support Resolution up to 4Kx2K@30Hz for RGB and 4Kx2K@60Hz for YUV4:2:0
• Support Hot-Plug Detect
• Support Status and Control Data Channel (SCDC)
• No HEAC and CEC Support

lDP1.2 Transmitter

• Compliant to VESA DP1.2 Standard
• Support Four Lanes with 1.62Gbps (RBR), 2.7Gbps (HBR) or 5.4Gbps (HBR2) Data Rate
• Data Lane and Polarity Swapping
• Support HDCP1.3 Encryption
• Support 18/24-bit RGB and YUV4:2:0 Data Format
• Build-in Pattern Generation
• Support Hot-Plug Detect
• Support Backlight Control for Screen Application
• Optional SSC 0.5% Down-Spreading Output
• Configurable and Power-on-Calibrated Output Swing for Optimized EMI
• Internal Rterm Calibration with Less than 5% Error

lUSB Type-C

• Compatible with USB3.1 Gen1, USB Type-C R1.0, DP Alt Mode V1.0 and USB PD R2.0
• 3 Data Roles Supported: DFP, UFP and DRP
• 2 Power Roles Supported: Source and Sink
• USB PD-PHY (Tx/Rx) and BMC Encoding / Decoding
• USB PD Protocol Control by Software
• Bi-directional Differential Passive Switch for USB3.1 Gen1 SS signal with less than 2.5-dB Insertion Loss, Controlled by Internal or External CC logic module
• USB Full-Featured, Orientation and Role Detection
• 3-level Current Ability Advertise (Host Mode) or Detection (Device Mode) for Type-C Power: USB Default, 1.5A@5V, 3A@5V
• SBU Data Path Control for DP Alt Mode
• OCP Control for External VBUS Power Switch
• Dead Battery Supports (Sink Mode) When No Power Applied

lAudio Input

• Support SPDIF and up to 8-CH I2S Audio Input in MIPI mode

lMiscellaneous

• 1.8V/3.3V Dual Supply Power
• External 25MHz Rrystal Reference Clock
• Temperature Range: -40°C to +85°C
• Packaged  in5mm x 5mm BGA81 and 7.5mm x 7.5mm QFN64