Features

lTTL Input

• Support up to 24-bit RGB/YUV and BT656/BT1120 Input
• Support SDR and DDR Data Sampling
• Support Resolution up to 4Kx2K@30Hz for RGB
• Support Resolution up to 4Kx2K@60Hz for YUV420

lDP1.2 Transmitter

• Compliant to VESA DP1.2 Standard
• Support Two Lanes with 1.62Gbps (RBR), 2.7Gbps (HBR) or 5.4Gbps (HBR2) Data Rate
• Data Lane and Polarity Swapping
• Support HDCP1.3 Encryption
• Support up to 24-bit RGB/YUV Data Format
• Support Resolution up to 4Kx2K@30Hz for RGB
• Support Resolution up to 4Kx2K@60Hz for YUV420
• Build-in Pattern Generation
• Support Hot-Plug Detect
• Support Backlight Control for Screen Application
• Optional SSC 0.5% Down-Spreading Output
• Configurable and Power-on-Calibrated Output Swing for Optimized EMI
• Internal Rterm Calibration with Less than 5% Error

lUSB Type-C

• Compatible with USB3.1 Gen1, USB Type-C R1.0, DP Alt Mode V1.0 and USB PD R2.0
• 3 Data Roles Supported: DFP, UFP and DRP
• 2 Power Roles Supported: Source and Sink
• USB PD-PHY (Tx/Rx) and BMC Encoding/Decoding
• USB PD Protocol Control by Software
• Bi-directional Differential Passive Switch for USB3.1 Gen1 SS signal with less than 2.5-dB Insertion Loss, Controlled by Internal or External CC logic module
• USB Full-Featured, Orientation and Role Detection
• 3-level Current Ability Advertise (Host Mode) or Detection (Device Mode) for Type-C Power: USB Default, 1.5A@5V, 3A@5V
• SBU Data Path Control for DP Alt Mode
• OCP Control for External VBUS Power Switch
• Dead Battery Supports (Sink Mode) When No Power Applied

lAudio Input

• Support SPDIF and up to 8-CH I2S Audio Input

lMiscellaneous

• 1.8V/3.3V Dual Supply Power
• External 25MHz Crystal Reference Clock
• Temperature Range: -40°C to +85°C
• Packaged in 10mm x 10mm QFN88