Features

• One-Channel MIPI® DSI Receiver
  • Compliant with D-PHY1.1 and DSI1.02
  • 1 clock lane and 1~4 configurable data lanes
  • 80Mb/s~1.5Gb/s per data lane
  • Data lane swappable and polarity swappable
  • Internal Rterm calibration w/i less than 5% error
  • 2-bit programmable equalization
  • Only Non-Burst Mode supported
• One-Channel LVDS Transmitter
  • 1 clock lane and 4 data lanes
  • Maximum 1.0Gb/s per data lane
  • Reduced output swing for low EMI
• HDMI Transmitter
  • Support HDMI1.4 standard
  • Up to 60Hz 1080p 8-bit HDMI output
  • 7-bit automatic or manual output swing calibration
  • 3-bit programmable de-emphasis
  • Support Hot-Plug Detect
  • No DDC and HDCP support for LT8912
• Miscellaneous
  • Support scaler function for MIPI to LVDS bridge
  • Single 1.8V supply power
  • Temperature range: −40°C to +85°C
  • Packaged in both 12x12mm LQFP80 and 7.5mm x 7.5mm QFN64

Description

The Lontium LT8912 MIPI® DSI to LVDS and HDMI bridge features a single-channel MIPI® D-PHY receiver front-end configuration with 4 data lanes per channel operating at 1.5Gbps per data lane and a maximum input bandwidth of 6Gbps.
The LT8912 is fabricated in advanced CMOS process and implemented in both 12mm x 12mm LQFP at 0.5mm pitch package and 7.5mm x 7.5mm QFN at 0.4mm pitch package. These packages are RoHS compliant and specified to operate from −40°C to +85°C.