IP802 is a 2-port PSE (Power Sourcing Equipment) controller IC for PoE (Power over Ethernet) systems. It integrates power, analog, and logic circuits into a single chip, and can be used for Midcap and Endpoint PSE applications.

IP802 meets all IEEE 802.3AF-2003 requirements, such as multi-point resistor detection, PD classification, DC Disconnect, and Back-off for Midcap. It also meets all IEEE 802.3AT-2009 requirements, such as two-event classification and supplies maximum 36W per port. IP802 comprises internal temperature monitoring and thermal protection to protect against junction overheating. The 3.3V regulator is built-in to support external devices. Multiple IP802s can integrate to build a 2 x N ports PSE system, and I2C bus uses to collect PD power status from each IP802 to support global power management.

Multiple IP802s can build a cost-effective PHY level PSE system to support PD classification and power management without a host. With a management host, a networked LLDP (Link Layer Discovery Protocol) based multiple IP802s PSE system can be built. Based on LLDP (part of IEEE Std 802.3AT-2009), dynamic power management between PSE and PD can be maintained in real time for power efficiency.

Management switch host has options to communicate IP802s via I2C bus for PSE management activities. Opt couplers can be implemented to provide electrical isolations between the host and IP802s for signal communication.